DINAN Negative Camber Control Arms BMW F01 750i Alpina B7 & L xDrive | F02 750Li 760Li xDrive | F07 535i 550i xDrive | F10 550i N63TU 528i 535i | F12 F13 640i 650i (P/N: D160-0006)
$926.00
- Brand: Dinan
- Product Code: Dinan.D160-0006
- Availability: Call for Pricing
BMW
▪ 528i & xDrive F10 Sedan 2011-2016
▪ 535i & xDrive F10 Sedan 2011-2016
▪ 535i & xDrive F07 GT 2010-2016
▪ 550i & xDrive F07 GT 2010-2012
▪ 640i & xDrive F12 Convertible 2012-2016
▪ 640i & xDrive F13 Coupe 2012-2016
▪ 740i & Li F01/F02 Sedan 2013-2015
▪ 750 Li & xDrive F02 Sedan 2009-2012
▪ 750i & xDrive F01 Sedan 2009-2012
▪ 760Li & xDrive F02 Sedan 2010-2015
▪ Alpina B7 & L, X F01/F02 2011-2012
▪ 650i Convertible F12 2012
▪ 650i & xDrive F13 2012
▪ 550i & xDrive F07 GT 2013-2016
▪ 650i & xDrive F12 Convertible 2013-2016
▪ 650i & xDrive F13 Coupe 2013-2016
▪ 650i & xDrive F06 Gran Coupe 2013-2016
▪ 750i & xDrive F01 Sedan 2013-2015
▪ 750Li & xDrive F02 Sedan 2013-2015
▪ Alpina B7 & L, X F01/F02 2013-2015
▪ 550i & xDrive F10 Sedan 2011-2016
Labor Hours/Installation Hours | 2.40 |
---|
Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in...
Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively. This increase in negative camber is accomplished in two ways. The shorter front upper control arm increases camber gain, which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition the static negative camber or the amount you will see on your alignment read out is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.
A quick look at your front tires will tell the story. If you are noticing significant outside edge front tire wear, perhaps even a bit of ''cupping'', you are definitely a candidate for the Negative Camber Control Arms. Not only will the extra camber improve the handling, but you'll also likely notice more even tire wear, assuming you continue to corner aggressively.
Benefits of the Dinan® Negative Control Arms:
+ Replaces front upper control arms with ones that increase negative camber by -0.5°
+ Improves grip of front tires
+ Evens out tire wear during aggressive cornering
ITEM LOCATION: SOUTHERN CALIFORNIA