DINAN Negative Camber Control Arms BMW F01 750i Alpina B7 & L xDrive | F02 750Li 760Li xDrive | F07 535i 550i xDrive | F10 550i N63TU 528i 535i | F12 F13 640i 650i (P/N: D160-0006)

DINAN Negative Camber Control Arms BMW F01 750i Alpina B7 & L xDrive | F02 750Li 760Li xDrive | F07 535i 550i xDrive | F10 550i N63TU 528i 535i | F12 F13 640i 650i (P/N: D160-0006)
Brand: Dinan
Product Code: Dinan.D160-0006
Availability: Call for Availability
Price: $926.00
Qty:     - OR -   Add to Wish List
Add to Compare
DINAN Negative Camber Control Arms
Part # : D160-0006
 
FITMENT:
BMW

▪ 528i & xDrive F10 Sedan 2011-2016
▪ 535i & xDrive F10 Sedan 2011-2016
▪ 535i & xDrive F07 GT 2010-2016
▪ 550i & xDrive F07 GT 2010-2012
▪ 640i & xDrive F12 Convertible 2012-2016
▪ 640i & xDrive F13 Coupe 2012-2016
▪ 740i & Li F01/F02 Sedan 2013-2015
▪ 750 Li & xDrive F02 Sedan 2009-2012
▪ 750i & xDrive F01 Sedan 2009-2012
▪ 760Li & xDrive F02 Sedan 2010-2015
▪ Alpina B7 & L, X F01/F02 2011-2012
▪ 650i Convertible F12 2012
▪ 650i & xDrive F13 2012
▪ 550i & xDrive F07 GT 2013-2016
▪ 650i & xDrive F12 Convertible 2013-2016
▪ 650i & xDrive F13 Coupe 2013-2016
▪ 650i & xDrive F06 Gran Coupe 2013-2016
▪ 750i & xDrive F01 Sedan 2013-2015
▪ 750Li & xDrive F02 Sedan 2013-2015
▪ Alpina B7 & L, X F01/F02 2013-2015
▪ 550i & xDrive F10 Sedan 2011-2016

 
Product Specifications
Labor Hours/Installation Hours 2.40

 

 

Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in...

DOWNLOAD INSTALLATION INSTRUCTION HERE

Product Description

Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively. This increase in negative camber is accomplished in two ways. The shorter front upper control arm increases camber gain, which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition the static negative camber or the amount you will see on your alignment read out is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.

A quick look at your front tires will tell the story. If you are noticing significant outside edge front tire wear, perhaps even a bit of ''cupping'', you are definitely a candidate for the Negative Camber Control Arms. Not only will the extra camber improve the handling, but you'll also likely notice more even tire wear, assuming you continue to corner aggressively.

Benefits of the Dinan® Negative Control Arms:

+ Replaces front upper control arms with ones that increase negative camber by -0.5°
+ Improves grip of front tires
+ Evens out tire wear during aggressive cornering

CONDITION: BRAND NEW

ITEM LOCATION: SOUTHERN CALIFORNIA

 

Dinan BMW F30 328i | Dinan F10 528i (N20) (EWG)
Dinan F22 Dinan F23 228i | Dinan F31 Dinan F34 328i | Dinan F32 Dinan F33 Dinan F36 428i(N20))
Dinan E89 Z4 sDrive28i (EWG)
Dinan F26 X4 28i
Dinan E84 X1 28i | Dinan F25 X3 28i

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
RG Sport © 2018