+1 626 217-2161
  • DINAN Carbon Fiber Cold Air Intake BMW F06 F12 F13 M6 (P/N: D760-0037)

DINAN Carbon Fiber Cold Air Intake BMW F06 F12 F13 M6 (P/N: D760-0037)


Price:

$3,089.00


  • Brand: Dinan
  • Product Code: Dinan.D760-0037
  • Availability: Call for Pricing
DINAN Carbon Fiber Cold Air Intake
Part # : D760-0037
 
FITMENT:
BMW
▪ M6 F06 Gran Coupe 2013-2016
▪ M6 F12 Convertible 2012-2016
▪ M6 F13 Coupe 2012-2016
Product Specifications
Labor Hours/Installation Hours 6.00
Emission Status Emissions legal in most states --This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is not legal for sale or use in California, and states that have adopted CA emissions standards, on any pollution controlled motor vehicles.
Peak Horsepower 693
Peak Torque 651
Required Items Installation requires specialized Dinan® tool kit, DT763-0083 or DT763-0082 (F10 550)

 

 

 

 

 

 

 

 

 

The F06/12/13 M6 Dinan® high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The F06/12/13 M6 cold air intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay.

DOWNLOAD INSTALLATION INSTRUCTION HERE
Not legal for sale or use in California. 

Product Description

The F06/12/13 M6 Dinan® high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The F06/12/13 M6 cold air intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The M5 cold air intake system was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a 77% larger capacity. Dinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.

The F06/12/13 M6 Cold Air intake is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is not legal for sale or use in California, or states that have adopted California emissions standards, on any pollution controlled motor vehicles. 

Benefits of Dinans Cold Air Intake:

+ Maximum peak power of 693 HP and 651 lb-ft of Torque utilizing Dinan Stage 2 components (DINANTRONICS™™ Performance Tuner, intake and exhaust). A difference of 13 HP and 7 lb-ft of torque from Dinan Stage 1 (D-TRONICS Performance Tuner Only). 
+ Dinan proprietary Injection molded Dinan MAF housings are larger than stock
+ Stock air filters are replaced with 77% larger Dinan conical air filters.
+ Entire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.
+ Stock System Stays Completely Functional
+ Carbon fiber air box lids and intake ducts
+ Raised Dinan logos are laminated into the carbon fiber intake
+ Rubber hoses, mounting brackets, & hardware included.

Also Recommended:

Free Flow Stainless Exhaust (D660-0049 & D660-0049-BLK): An important addition for any enthusiast who wishes their car to sound as good as it performs while also supplying significant power gains itself. These exhausts are dyno tested for maximum exhaust flow with minimum backpressure. The system is designed to provide a more aggressive sound under acceleration, while reducing drone inside the vehicle, thanks to Dinan’s exclusive Helmholtz Chamber and Butterfly Valve technologies.

DINANTRONICS™ Performance Tuner (D440-1603-ST1 & D440-1603-ST2):  The DINANTRONICS™™ Performance Tuner is a highly engineered and sophisticated piece of computer hardware and software that enhances engine performance, without negating or voiding your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. It is also the only tuning device emissions legal in all 50 states. The ultimate objective of developing this piece of technology was to provide the ability to control every signal entering and exiting the BMW factory Engine Control Unit. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package. 

CONDITION: BRAND NEW
ITEM LOCATION: SOUTHERN CALIFORNIA

 

Dinan BMW F30 328i | Dinan F10 528i (N20) (EWG)
Dinan F22 Dinan F23 228i | Dinan F31 Dinan F34 328i | Dinan F32 Dinan F33 Dinan F36 428i(N20))
Dinan E89 Z4 sDrive28i (EWG)
Dinan F26 X4 28i
Dinan E84 X1 28i | Dinan F25 X3 28i

Write a review

Please login or register to review