+1 626 217-2161

Evolution Racewerks 2016-UP BMW B48 Engine Turbo Competition Series 4" Catless Downpipe (BM-EXH023)


Price:
$495.00

$445.50

Price with options x Qty: $445.50


Available Options

2016-UP BMW B48 Engine Turbo Competition Series 4" Catless Downpipe

BM-EXH023

Fitment:

- BMW 2016+ F2x 230i, 230iX
- BMW 2015+ F3x 330i, 330iX
- BMW 2016+ F3x 430i, 430iX
- BMW 2017+ G30 530i, 530iX
- BMW 2018+ G01 X3 sDrive30i / xDrive30i
- BMW 2018+ G02 X4 sDrive30i / xDrive30i

Introducing our new Competition Series 4" Downpipes for your BMW B48 four cylinder turbo engine!  Fits all 2016+ 120i / 125i / 230i / 330i / 430i / 530i / X3 30i / X4 30i!  The B48 engine is found in the European and Asia spec cars.  The downpipe is different than the B46 found in the U.S. spec cars.  You must get the correct downpipe for your car as they are not interchangeable.  

bm-exh023s2a
bm-exh023s3a

Shown in Brush Finish

CAUTION: This product is intended for OFF ROAD COMPETITION USE ONLY. Not legal for use on pollution controlled vehicles upon public road/highways. THIS PRODUCT IS FOR SALE FOR ALL 49 STATES EXCLUDING CALIFORNIA.  In addition to vehicle use verification, a Vehicle Compliance Waiver needs to be signed.

THIS ITEM IS NOT FOR SALE, INSTALLATION, OR USE ON LICENSED VEHILES IN THE STATE OF CALIFORNIA. 

The item is for sale for international customers without restriction.

Ease of Installation: (1 Easy, 5 Hard) 2

Installation Guide

Parts Checklist

Key Features:

  • Now available for the 2016+ BMW 230i / 330i/ 430i / 530i B48 Engine!
  • Horsepower gains of 14 to 16whp average (gains will vary based on modifications of your vehicle).
  • Higher Max Horsepower Power Curve
  • Torque gains of 20 wtq average (stock boost) up to over 24 wtq (Software upgrade) (gains will vary based on modifications of your vehicle).
  • Higher Intial Torque Curve.  Torque curve hits faster and higher and longer.
  • Better throttle response and faster turbo spool up times.
  • Mandrel Bent 4" piping.  Smooth transition to the exhaust system.
  • 100% Stainless Steel Construction
  • 100% TIG welded for better quality welds
  • Precision CNC machined turbocharger V-Band flange.
  • Stainless steel flex section like factory that allows proper exhaust movement and flexibility.
  • Mirror polish or brush finish
  • Available with high temperature black thermal coating to reduce underhood temperatures.
  • Optional - Additional O2 sensor bung for wideband O2 sensors (comes with pre-installed plug)
  • Optional EGT sensor bung for EGT gauges (comes with pre-installed plug)
  • Compatible with the factory or aftermarket exhaust systems.
  • Track tested durability.
  • Includes all hardware for complete installation.
  • Limited Lifetime Warranty.

 

bm-exh023s1a

 

Shown in Brush Finish

 

bm-exh023tb1

 

Shown in Thermal Coated Black

Restrictions in the exhaust system robs horsepower and torque especially on turbocharged cars.  Thus, removing as much exhaust flow restrictions will increase horsepower and torque significantly.  The factory catalytic converter found in the factory downpipe is a big culprit of this and is a major exhaust flow restriction.  The factory catalytic converter is made up of catalyst material formed into "honeycomb" weaves.  Exhaust gas must pass through these tiny "honeycomb" weaves on their way to the exhaust system thus causing a major exhaust flow restriction.  It also causes turbulence after the catalytic converter which causes the exhaust flow to slow down (which increases restriction).  By replacing the factory downpipe/catalytic converter with our Competition Series 4" Catless Downpipe, more power is unleashed!  Our dyno testing has shown around 14-16whp average peak gains and upwards of 24wtq peak gains!  While peak horsepower is nice to look at on dyno charts, what's more important is the power curve.  If you look at the dyno charts, torque hits MUCH earlier and harder.  The torque curve is BROADER throughout the RPM band.  More usable power.  You have more time spent in the RPM band with higher horsepower and torque.  This equates to faster turbo spool up (less turbocharger lag) and better throttle response.  Bottom line, faster.  You will feel the difference instantly. 

 

Blue Line - Stock Downpipe with Evolution Racewerks Charge Pipe Kit (Baseline)

Red Line - Evolution Racewerk Downpipe and Charge Pipe Kit

Our Competition Series Catless Downpipes is constructed out of 100% 304 grade stainless steel and utilize mandrel bent piping.  They are 100% TIG welded by our in house fabricators and built in the USA.  The factory turbocharger turbine housing utilizes a 4" V-Band flange which we have duplicated and CNC machined cut out of billet 304 stainless steel.  Stainless Steel CNC machined O2 sensor and laser cut brackets are TIG welded using stainless steel rods.  The O2 sensor is positioned at the factory location.  Since the outlet of the turbocharger is 4" and the factory exhaust system is 3", the factory downpipes reduces size using short transitions from 4" before the catalytic convert and 3" afterwards.  Due to space needed for the cataylic converter, the factory downpipes reduce in size using very short transitions.  Since our catless downpipes delete the cataylic converter, we have more space.  Thus, we use very long transitions.  These longer transitions allow the exhaust gas time to smoothly transition from the larger piping to the smaller.  This results in less exhaust turbulence and backpressure which again improves throttle response and increase turbocharger spool times (less turbocharger lag). 

 

 

Write a review

Please login or register to review