H&R 14MM Spacer 5/130 PCD 71.6 CB (P/N:28957161)
- Brand: H&R
- Product Code: HRS.28957161
- Availability: In Stock
H&R 14MM DR Spacer 5/130 PCD 71.6 CB
MODEL : H&R Part Number 28957161
- Porsche 911 996 C2 / C4 / C4S / Turbo 1998-2005
- Porsche 911 997 Carrera / C4 / C4S / Turbo 2005-up
- Porsche 986 / 987 Boxster, Boxster S 1997-up
- Porsche 987 Cayman, Cayman S 2006-up
- Porsche 970 Panamera 2011-up
CONDITION : BRAND NEW
Please contact us for availability and fitment.
** All DR-Systems require longer wheel bolts. These must be ordered separately. When ordering wheel bolts, please follow these guidelines:
a) If possible, name the brand of wheel.
b) New bolts must be longer than the original bolts by the width of the wheel spacer used.
c) The bolt head must be identical to the existing bolt:
Taper 60° End digit 01
Round head for M12/d24 mm, for M14/d28 mm End digit 02
Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03
Flat head for Porsche original wheels M14 x 1.5 End digit 06
d) Safety guidelines
(Minimum number of turns for wheel bolts / nuts):
M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).
** Product image is for reference only, may not resemble the individual product listed.